|
Post by jameslim on Jun 22, 2006 16:50:36 GMT 7
*Update*Almost done!!! Just the blardy chip to get, E6700 faster come!!! Lian Li V2100 Exterior No, that's not blood on the casing, its the reflection from the floor Modded Version Casing was cut to exactly fit the Fan guard on top, fan has yet to be mounted. Side uses a dust filter, fan has been mounted for that one. Interior Gigabyte GA-965-DQ6 5 x Seagate 7200.10 320GB Rams G.Skill 1GB x 2 DDR2-800 4-4-4-12 SilverStone Strider Modular PSU 600W Zalman CNPS9500 Graphic Cards + Optical Drive LED fans
|
|
|
Post by jameslim on Jun 22, 2006 17:31:48 GMT 7
What's left?: - Conroe E6700 2.66ghz Dual-core (Kena sai, Intel Distro slow, delayed till early august Knnbccb) Building Progress: Mounted motherboard, PSU, Graphic Card and RAM Mounted HDDs A close look at the CPU heatsink Comparisons to my AMD rig, note the smaller casing is still a standard ATX casing meant to fit 4 x 5.25" and 4 x 3.25" plus an ATX Motherboard
|
|
alonsocwj
Main Committee
Believe in urself, believe in AMD
Posts: 289
|
Post by alonsocwj on Jun 23, 2006 0:01:57 GMT 7
lol not bad gskill i waiting for OCZ to come out
|
|
|
Post by jameslim on Jul 7, 2006 17:52:43 GMT 7
Did some Modification to my casing, 2 more 120x120mm blowholes. Broke 2 drill bits and worn out 5 cutting blades. Cut to perfection. Finish
|
|
|
Post by jameslim on Jul 8, 2006 14:27:30 GMT 7
Bought some new LED fans Starting to mount them. Some graphic cards ;D and a DVD-RW DL RAM+-
|
|
|
Post by jameslim on Jul 25, 2006 21:14:24 GMT 7
Bought Motherboard Gigabyte 965P-DQ6 Whacked Seagate 5 x 7200.10 320GB SataII
|
|
|
Post by st1ckman on Nov 10, 2006 13:06:48 GMT 7
Sorry for reviving a dead thread... But when i was browsing through this... my heart almost jumped into my throat...
|
|